Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
22 / 52
1
Move the label peeling bar from its position for cylindrical bottles (photos 1 and 2) to its position for square-
section bottles (photo 3);
2
The label peeling bar will be correctly positioned
when the two notches are in contact with the upper plate
and the blade edge is aligned with the plate itself (photo
4);
3
Make sure that the labels film slides between the label peeling bar and its support shaft (photo 5);
