4
2
1
3
5
Alternative nuts
4
Steps 1-5
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
1
Position the spout in the second hole of sink. Insert spout into the mounting hole in deck from
above. From underneath the sink, install the washers and lock nut. Slide on adapter over bottom
of spout shank, and tighten with lock nut.
2
Place the handle body through side hole. Re-assemble the mounting hardware onto valve shank;
use phillips screwdriver for final tightening.
3
Fix the handle with set screw provided.
4
Install the other handle assembly and body.
5
Connect flexible hoses. Alternative nuts are supplied in case you want to connect copper pipes
instead.
