SN-L+ USER MANUAL
6
4.
INSTALLATION：
PMU MODULE
INSTALL DIRECTION OF FC
4 install direction：
<BASE FUNCTION> -> <AP DIRECTION>
0°
Arrow point to head
180°
Arrow point to rear
90°
Arrow point to Left side of the nose
270°
Arrow point to right side of the nose
The FC installation should try to avoid the vibration source and keep away from the motor; try to install it near the center of
gravity. Be sure to recalibrate the level after changing the installation direction
HOW TO CONNECT SERVO
Interface
Type
AIL
ELE
THR
RUD
Wing
SERVO 1
SERVO 2
THR
T tail
AIL SERVO
ELE SERVO
THR
RUD SERVO
V tail
AIL SERVO
ELE SERVO1
THR
ELE SERVO2
How to configure the throttle differentia
l: Just configure one of the AUX ports such as AUX1 as the <
THR
> function, the flight control will
differentially control the throttle channel and the AUX1 channel; Note that the differential control map is the direction stick, please Confirm that the
direction of the throttle differential is correct, and set the differential amount in
< SERVO >
->
< THRROTLE DIFF >
. The greater the differential amount,
the faster the flight turns, but it is easier to stall.
