6
Low voltage alarm to remind changing battery.
This product has low voltage detection reminder, When the battery voltage is in low status, the
detector will give out low battery signal to controller.
8.
Attention
1.
If the sensor needs to be cleaned, remove power and use a soft cloth with a little alcohol and wipe
down the device.
2.
This product is just for indoor use only.
3.
Replace the battery immediately when the low battery warning is indicated.
4.
Product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery operated nodes within the network will act as
repeaters regardless of vendor to increase reliability of the network.
5.
If you want your product to be a security device that use secure/encrypted message to communicate in a
Z-Wave network, then a security enabled Z-Wave controller is needed.
9.
Configuration Command
9.1. SECURITY AND NON-SECURITY FEATURES OF DOOR/WINDOW SENSOR IN Z-WAVE
NETWORK
1. The function of the Door/Window Sensor as a security and non-security device is identical.
2. When a node includes into a S2 Z-Wave network, the node supports S2 authenticated, S2
unauthenticated class and so do the supported CCs
.
3. Commands List
Included Non-Secure Network
Included Secure Network
Non-secure
supported
Command
Classes
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
COMMAND_CLASS_SECURITY0_V1
COMMAND_CLASS_SECURITY2_1
COMMAND_CLASS_TRANSPORT_SERVICE_V2
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1
COMMAND_CLASS_POWERLEVEL_V1
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_BATTERY_V1
COMMAND_CLASS_NOTIFICATION_V8
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
COMMAND_CLASS_SECURITY0_V1
COMMAND_CLASS_SECURITY2_V1
