2
1
2
Mount your press. The most convenient way to mount your
press is with our
Lee Bench Plate System # 90251 or Lee
Reloading Stand #90688
. This system includes all of
the mounting hardware and allows for quick press removal
without unbolting from bench. Or, purchase (qty. 3)
¼
” bolts
and nuts and prepare your workbench for use with this press.
# 90251 Bench Plate
# 90688 Reloading Stand
SAFETY CONSIDERATIONS
• Be sure of proper powder and charge for
bullet weight selected.
• Wear safety glasses and hearing protection
when reloading or shooting.
• Be extremely careful to avoid a double
charge. If in doubt, empty the case and
recycle it.
• Do not permit distractions while loading.
This is a complex machine that needs
your fullest attention.
SMOOTH OPERATING TIPS
• Always move the lever smoothly in complete
strokes. An interrupted stroke can cause
a jam or double charge.
• Do not force it or you will break something. If
it does not feel right, stop and check out
the problem.
• Oil ram using STP™ motor oil treatment.
Using any oil, lubricate link bolts every
few thousand rounds.
SETUP TOOLS REQUIRED
• Safety glasses & ear protection
• 1⁄4 inch allen wrench (included)
• Lock ring wrench (included)
Slide the primer collection tube assembly onto bottom of
the ram.
3
PRIMER FEED SETUP
Primer feed spring comes installed on the
tool head. Confirm that the open end of the
hook is facing you.
C
Select proper primer guide and connect to the
primer slider with the L or S face down. Insert
primer slider and guide assembly into the end of
the trough. Slide the slider assembly up to the
shell plate.
Raise the carrier to the top of the stroke.
Take the primer feed spring and manipulate
it to align the hook onto the primer slider.
After installation is completed cycle the press
to assure free in/out travel. These steps can be
reversed for changing the primer guide.
*IMPORTANT* Do not operate primer feed without a small or large primer guide installed into slider. Doing so will cause damage to your primer slider.
Install face down
Primer Guide
91981 Large
Primer Guide
91980 Small
*Note* Small guide has a
dimple on attach boss.
A
B
D
E
Important!
Do not operate without a small or large
primer guide intalled into slider.
*Note* Small guide has a
dimple on attach boss.
