Headgear
The headgear is controlled by Velcro and can easily be adjusted. It also comes with
mulDple figng points for the cable from the lamp case and its plug, and for the cable
from the main ba>ery that is threaded through a loop before it connects to the lamp
case. At the back of the headgear there is a Dual Lock™ Velcro to a>ach the backup
ba>ery.
Put on the headgear like this:
!
Release the lower headband and elasDc on the
back of the headgear. Let the upper elasDc at-
tach about half way on the Velcro.
Put on the headgear, pull it down as
far as
possible or unDl it sits
comfortably.
Adjust the length of the upper band unDl com-
fortable.
Adjust the lower band so it fits Dghtly in the
neck.
Then adjust the clasp at the top band.
A>ach the cables to the main ba>ery and the backup ba>ery according to the pictu-
res.
