Installation Instructions
2
|
P a g e
v 1 . 0 p u b l i s h e d o n 0 6 2 0 1 7
Mains Supply Wire
Wiring Label
Earth – Yellow/Green
Yellow/Green
Neutral – Blue or Black
N (Neutral)
Live – Brown or Red
L (Live)
7.
Install the mounting bracket onto the wall by using appropriately sized mounting screws, plastic washers and
anchors.
8.
Ensure the screws, plastic washers and anchors used are suitable for the mounting surface.
9.
Place the mains supply wire in the cord anchorage system and secure by tightening the screws again.
10.
Install the fitting back onto the mounting bracket.
11.
Tighten the two screws using an allen key.
Adjust the LED heads to the desired position.
12.
Switch the power to circuit back ON only after all electrical work has been fully completed and the fitting is fully
assembled and is ready to use for the first time.
Safety tips
•
Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning or
making any adjustment to the fitting.
•
To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the
power.
•
Select a suitable location away from liquids and hazards.
•
Ensure that the fitting does not come in contact with corrosive chemicals, etc.
•
To clean, wipe with a damp clean cloth. Never soak the fitting with water.
