E. Instruction of buttons
E-1. Set up DMX address
When the digital tube is not flashing, press “A” key, one digital begin to flash, and press “A” key
once again, digital tube moves backward, you can start to edit the new address, Press “B” key, the
corresponding flash digital tube increase one bit (the values between 0 to 9);
*** the range of valid address:001~512
E-2. Adjustment and choice of function for independent mode
After you press “A” key four times (the first three times is the setup of the address of DMX, for
the independent mode to adjust or choose function; the digital tube shows Pxy, they correspond with
three digital tubes respectively. You can press “B” key, the flashing digital tube adds eleven ( the value
between 0 to 9);
“X” corresponds with the choice of function (the value between 1 to 3), “Y” corresponded with the
value of speed and gray degree for some function (the value between 1 to 9)
The form about function and parameter:
X value
Y value(range and function)
1-multicolorjumping
1~9 class speed
2-multicolor fading
1~9 class speed
3-multicolorflashing
1~9 class flash speed
E-3. When you press button, please hold on about 10 seconds, then you can exit the mode of
adjustment function, the digital tube stop flashing and to memorize the adjusted parameters.
F. Using instruction
F-1. Independent mode: you can adjust the preset functions of lighting by button on the back of light;
F-2. DMX mode; DMX console to control the lighting, referring to the manual of the relevant console
for attaining more information.
F-3. Master/Slave function for independent mode, please choose at random some lighting as a
master to attaining auto online function, the relative operation as below: firstly, set the address of a
master as 001, others are be set as a slave. For auto online mode, only one master, all effects
depend on the effect of the master;
F-4. DMX address, each lighting occupies three channels, that is red, green, blue, including the
value of the initial channel, For example, Adrress 001 occupies the channel 1,2 and 3. Address 256
occupies the channel256,257 and 258.
F-5. Do not plug them into power when the product is still in package.
A B
