Operations:
There are three operating modes to choose from;
1, Auto run
2, Sound Active
3, DMX
NOTE: Before use, please insert the supplied SD card and follow the instructions below.
Auto run mode
To set the Matrix cloth in auto run mode, set all dip switches to the off position and use the
“SENSITIVITY/SPEED”
control to set the desired running speed. The Matrix cloth will now run
through all of its in-built programmes.
Sound active mode
To set the Matrix cloth into sound active mode, set dip switch “
10”
to the
ON
position and all
others to the
OFF
position. Now use the
“SENSITIVITY/SPEED”
control to set the desired
sensitivity level.
DMX mode
DMX Control Mode
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the cloth and each cloth independently. The Matrix Cloths uses 2 channels of control.
Use dip switches 1 – 9 to address each cloth accordingly.
Setting the DMX address
The DMX mode enables the use of a universal DMX controller. Each cloth requires a “start
address” from 1- 511. A cloth requiring one or more channels for control begins to read the data on
the channel indicated by the start address. For example, a cloth that occupies or uses 7
channels of DMX and was addressed to start on DMX channel 100, would read data from
channels: 100,101,102,103,104,105 and 106. Choose a start address so that the channels used
do not overlap. E.g. the next unit in the chain starts at 107.
DMX chart:
LEDJ MATRIX STARCLOTHS
Operations
Channel
1
2
Value
0-9
10-255
10-255
Function
Blackout
Sound Active
Pattern group selector
0-9
Blackout
0-255
Speed (slow to fast)
Notes
CH1 0-9 Blackout
