background image

www.prolight.co.uk

PRO LED Starcloths, CW

  

User Manual

10

Notice:

Be sure to follow the diagrams below when making your own cables.  
Do not connect the cables shield conductor to the ground lug or  
allow the shield conductor to come in contact with the XLRs  
outer casing. Grounding the shield could cause a short circuit  
and erratic behaviour.

 

Line termination:

When longer runs of cable are used,  
you may need to use a terminator on  
the last unit to avoid erratic behaviour.

Using a cable terminator will decrease  
the possibilities of erratic behaviour. 
(3-pin - Order ref: CABL90,  
5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Some manufactures use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR fixtures 
may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 
3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion.

5-pin XLR (female)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (female)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (male)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (male)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

Termination reduces signal 

transmission problems and 

interference. It is always 

advisable to connect a DMX 

terminal, (resistance 120 

Ohm 1/4W) between pin 2 

(DMX-) and pin 3 (DMX+) of 

the last fixture.

5-Pin

1

2

4

5

3

3-Pin

1

2

3

Pin Configuration

3-Pin

5-Pin

Pin 1 - Ground

Pin 2 - Negative

Pin 3 - Positive

Pin 4 - N/C

Pin 5 - N/C

1

2

3

1

2

3

DMX 512

3-Pin XLR output

DMX 512

3-Pin XLR input

GROUND

DMX +

DMX –

DMX 512

5-Pin XLR output

DMX 512

5-Pin XLR input

1

2
4 5

3

1 2

4

5

3

GROUND

N/C

DMX –

N/C

DMX +

1 ground

3 hot

2 cold

3-Pin XLR male

3-Pin XLR female

2 cold

3 hot

1 ground

2 cold

1 ground

5 N/C

3 hot

4 N/C

5-Pin XLR male

5-Pin XLR female

4 N/C

5 N/C

1 ground

3 hot

2 cold

Summary of Contents for PRO LED Starcloths CW Series













Reviews: