background image

www.prolight.co.uk

Starlit Dance Floor

  

User Manual

6

Panel locking mechanism:

The panels each lock together using a special locking mechanism. Lay the first panel flat on the floor in 
the orientation shown below. Hold the second panel at an angle as shown in the diagram and push  
towards the first panel allowing the aluminium lugs to locate. When the two panels are fully touching 
along their edges, lower the panel to the floor. If the panels are not square, or if the edges are not fully 
touching the panel being fitted will not lower. DO NOT FORCE THE PANELS DOWN! Simply adjust the 
alignment until the panel will lower to the floor.

Detailed laying instructions:
Row 1:

Start at the top left hand corner position by placing a full panel (2ft x 4ft) with the 2 end lugs pointing  
to the right. Please ensure you leave space to add the edge trim between the dancefloor and any  
immovable objects such as walls or staging. 

Lay a second panel with the 2 end lugs also pointing to the right.
 
 
 
 
 
 
 

Continue to lay the row with as many full panels as required for the size of floor required, add onto the 
end of this row a three sided half panel if required. Take great care to ensure the panels are aligned 
flush along the length of the row to ensure the edging will be straight. After completing the first row of 
panels, fit the edging to this row before continuing to lay the second row.  

Operating instructions

First Panel

2 end lugs pointing to the right

First Panel

Second Panel

Power Edge

Summary of Contents for LEDJ400













Reviews: