www.prolight.co.uk
100W UV COB Flood
User Manual
7
Operating instructions
Sound active:
To access the sound active mode, press the
“MENU”
button until the display shows
SJ-5
on the LED
display. Use the
“UP”
and
“DOWN”
buttons to select the required sound sensitivity from
SJ-1
~
SJ-8
. Press the
“ENTER”
button to confirm the setting.
Value: 1 - 8 (1 = low sensitivity, 8 = high sensitivity)
To exit out of any of the above options, press the
“MENU”
button.
Display backlight:
To access the display backlight setting, press the
“MENU”
button until the display shows
don
on the
LED display. Use the
“UP”
and
“DOWN”
buttons to select either
don
(display backlight on) ~
doff
(display backlight off). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Display inverse:
To access the display inverse setting, press the
“MENU”
button until the display shows
don
on the
LED display. Press the
“ENTER”
button to display
Stnd
and use the
“UP”
and
“DOWN”
buttons to
select either
Stnd
(display standard) ~
(display inverse).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Reset factory settings:
To reset the factory settings, press the
“MENU”
button until the display shows
don
on the LED display.
Press the
“ENTER”
button twice to display
dEFa
. Press the
“UP”
and
“DOWN”
buttons together and
the fixture will be reset to its factory settings.
To exit out of any of the above options, press the
“MENU”
button.
rEv
