background image

www.prolight.co.uk

HEX Par 7

  

User Manual

10

Setting the DMX address:

The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start address” 
from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel 
indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was 
addressed to start on DMX channel 100, would read data from channels: 100,101,102,103,104,105 
and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the 
chain starts at 107.

DMX 512:

DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent 
fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. 
DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT”  
XLR terminals located on all DMX fixtures (most controllers only have a data “out” terminal).

DMX linking:

DMX is a language allowing all makes and models of different manufactures to be linked together  
and operate from a single controller, as long as all fixtures and the controller are DMX compliant.  
To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest  
cable path possible. The order in which fixtures are connected in a DMX line does not influence the  
DMX addressing. For example; a fixture assigned to a DMX address of 1 may be placed anywhere in  
a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a  
DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit,  
no matter where it is located in the DMX chain.

DATA cable (DMX cable) requirements (for DMX operation):

This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. 

 

 

 

DMX setup

Further DMX cables can be purchased from all good sound and lighting suppliers or Prolight Concepts dealers.
Please quote:

LEDJ 1m Interior - 
Exterior DMX cable

LEDJ 1m Exterior  
DMX cable

LEDJ 2m Exterior  
DMX cable

LEDJ 5m Exterior  
DMX cable

LEDJ 10m Exterior  
DMX cable

Order code: LEDJ91

Order code: LEDJ141 Order code: LEDJ142 Order code: LEDJ143 Order code: LEDJ144

LEDJ 1m Exterior  
Power cable

LEDJ 2m Exterior  
Power cable

LEDJ 5m Exterior  
Power cable

LEDJ 10m Exterior  
Power cable

Order code: LEDJ146 Order code: LEDJ147 Order code: LEDJ148 Order code: LEDJ149

Also remember 
that DMX cable 
must be daisy 
chained and 
cannot be split.

Summary of Contents for HEX Par 7













Reviews: