www.prolight.co.uk
Event Spot Rapid RGBW
User Manual
9
Built-in programs:
To access the built-in programs, press the
“MENU”
button on the rear of the unit to show
“1.STATIC”
on the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
select one of the 4 built-in programs (static colour, colour change, 4 colour change or colour fade).
1.STATIC
- Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select between
“00” - “99”
for R (Red), G (Green), B (Blue), W (White) and F (Flash).
Press the
“ENTER”
button to confirm the setting.
(00 = LED off/strobe off, 99 = LED at full brightness/strobe fast)
For
2.CHANGE
,
3.CHANG4
and
4.FADE
programs press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the speed from
“00” - “99”
. Press the
“ENTER”
button again and use the
“UP”
and
“DOWN”
buttons to set the strobe speed from
“00” - “99”
.
Press the
“ENTER”
button to confirm the setting.
(00 = speed slow, 99 = speed fast).
To exit out of any of the above options, press the
“MENU”
button.
Sound sensitivity:
To adjust the sound sensitivity, press the
“MENU”
button on the rear of the unit to show
“SOUND
SENS”
on the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
sensitivity from
“00” - “31”
. Press the
“ENTER”
button to confirm the setting.
(00 = low sensitivity, 31 = high sensitivity).
To exit out of any of the above options, press the
“MENU”
button.
IR remote on/off:
To set the IR remote on/off, press the
“MENU”
button on the rear of the unit to show
“IR. REMOTE”
on
the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“ON”
or
“OFF”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Dimmer response:
To set the dimmer response, press the
“MENU”
button on the rear of the unit to show
“DIMMER”
on the
LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“RESP_01”
or
“RESP_02”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
DMX fail:
To set the DMX fail setting, press the
“MENU”
button on the rear of the unit to show
“DMX FAIL”
on the
LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select between
“HOLD”
(
hold last DMX command),
“BLACKOUT” (
blackout)
or
“STATIC” (
run static colour mode).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
Summary of Contents for Event Spot Rapid RGBW Series
Page 1: ...Order codes LEDJ239 Black Housing LEDJ239A White Housing Event Spot Rapid RGBW User Manual...
Page 13: ...www prolight co uk Event Spot Rapid RGBW User Manual 13...
Page 14: ...www prolight co uk Event Spot Rapid RGBW User Manual 14...
Page 16: ...www prolight co uk Event Spot Rapid RGBW User Manual 16...
