background image

Subject to change without notice.

LED IT COMPANY LIMITED

Room A, 21/F, Gaylord Commercial building,

114 -118 Lochkart Road, Wanchai, Hong Kong

Contact :  [email protected]

7

LARVIK SOLAR User Manual

Solar Panel Maintenance Instructions (Part B)

Tips for cleaning solar panel glass

For safety reasons, it’s also wise to clean your panels from the ground  if possible. A good quality 

soft brush and a squeegee with a plastic blade on one side and a cloth covered sponge on the other 

coupled with a long extension can make for the perfect tools allowing you to stay on the ground.

 

Clean your panels on an overcast day with no sun, early in the morning or in the evening. If the sun is 

beating down on the panels , any water used can quickly evaporate and dirt will become smeared.

 

Early morning can be a particularly good time for cleaning as dew that has 

steeled on the panels overnight will likely have a softened grime; meaning you’ll 

need to use less water and less energy to clean your solar panels.

 

If the panels are dry, before tackling the modules with water, brush off 

any loose materials, this will make cleaning easier and faster.

 

Don’t use metal objects or harsh abrasive products for removing hard stains on materials, 

scratching the glass a solar panel can affect its performances as scratches will cast shadows. 

 

Avoid using detergents if possible as these may streak the glass of the panel.                      

To use abrasive powders also risks  scratching the panels.

 

Given the nature of good quality solar panel glass, clean water and a little scrubbing with a 

coarse cloth covered sponge or soft brush should remove the most stubborn grime.

 

The cleaning interval is recommended once in two months at normal weather conditions.

A long extension 
pipe is a perfect 
tool allowing you to 
stay on the ground

Use a hose with a 

suitable nozzle to 

allow the stream 
of water to reach 
the panels

WARNING

MAINTENANCE

Symptom

Problem

Cause Solutions

Lamp doesn’t work

Light source is damaged

Replace it with the same light source

The battery has run down

Charging the battery

Light doesn’t work in day time

Changing the light setting with remote control

Positive & negative of solar panel 

are connected conversely

Connect the positive & negative of solar panel to a correct 

position

Summary of Contents for LARVIK SOLAR








Reviews: