4.2 Receiver learning ID
Initial using easy RGB(Y) remote controller
must learn the ID of the receiver,
the purpose of learning ID code is to make a certain receiver which can
correspond the sender.
The method of Receiver learning ID is as follows: press the ID learning
button
on the sender, the ID learning indicator
is on, then press
one of the number button
on the sender, press the number
that you want this receiver to be, E.g. If you want this receiver to be No. 1,
please press button
first, then touch the wheel
, or you can press
any functional button on the sender, such as
etc. to transmit signal to the Sender,
after Receiver receives the signal from the sender, the indicator will flash a few
times
and then turns off, then receiver ID is activated. If the ID activation is
failed at the first time, please repeat the previous procedures.
Attention: The receiver ID learned by touching color wheel
is different from
the reciever that learned by pressing function button
。
The receiver ID learned by touching color
wheel
that we define it as SLAVE receiver, the receiver ID learned by
6
Summary of Contents for Easy RGB(Y)
Page 2: ...Fig 1 2 Fig 2...
