12
forever . For example, 10 receivers are learned to be ID 1. , these 10 receivers
will change according to one mode, in order to avoid chaos of working units
after a long time, one of the receivers is needed to be set as Master ,the Master
will launch synchronized signal when color is changing, thus ensure this group
of receivers are in good order no matter how long the color is changing
5.5 Color changes of multiple-different ID receivers in the same mode
In order to avoid
chaotic phenomena after a long time, when
multiple-different ID receivers are changing the color under the same mode,
one MASTER receiver is needed to be set in this group .
How to set MASTER
receiver and SLAVE receiver , please refer to 4.2 (Receive learning ID code).
Notice:
Only onemaster receiver can be set among a group of receivers,
otherwise it may cause chaotic phenomena. , the Master will launch
synchronized signal when colour is changing to ensure this group of receivers
will be in good order no matter how long the color changes. For example,
Receiver 1,2,3,4,5 move color under the same mode 1, at this time, you need
to set one of the receivers as Master receiver , if receiver 1 is set as
MASTER, then receiver 1 will launch synchronized signal to other receivers
2,3,4,5, meantime they will keep changing constantly without chaos according
to the synchronized signal from receiver 1. In addition: if there are several
receiver 1, only one of them can be set as MASTER receiver, others must be
set as SLAVE receiver, otherwise it will cause chaos .
5.3 The usage of button M ---the switch between
Synchronous color changing
and asynchronous color changing
Summary of Contents for Easy RGB(Y)
Page 2: ...Fig 1 2 Fig 2...
