WARRANTY
This product comes with 2 years ltd warranty, lifelong technical maintenance. The warranty excludes improper connection to power supply, power
overload, manual damages and improper use. Repair or replacement as provided under this warranty is exclusive remedy of the customer. We shall
not be liable for any incidental or consequential damages for bench of any stipulation in this warranty.
LOW VOLTAGE INPUT
Input power to the DC+ and DC- with Class 2 regulated (low voltage) power source.
Verify that the power supply is a regulated Class
2 power supply.
If attaching RGB Flex Strip to LT-995 DMX512, correct polarity is imperative; Black (or White) wire is positive (+) and goes to “V+” terminal. The
common format is to insert the Red wire to Ch1, Green wire to Ch2 and Blue wire to Ch3. If unit is set to DMX Channel1, the unit will automatically
occupy channels 1,2,3 and 4 on the master DMX console. Ch4 is for single color LED Flex Strip or white in RGBW strip.
If attaching a single color, the format is to attach the positive to V+ and negative to Ch1 (but can also be Channel 2,3,4 or 5) for standard
congurations of RGB.
1-800-387-4081
ledworldlighting.com ledworld.ca
4/4
LT-995 DMX/RDM Decoder Manual
Copyright © 2019 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 12/02/19
