4/4
MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY LED WORLD’s CLASS 2 POWER SUPPLY
Power Supply
Max Feet of LED Flexstrips
Power Supply
Max Feet of LED Flexstrips
21.3 Feet (Continuous 77 Watts)
Apply 1 ½” long electrical heat shrink over all connection points. Secure connection wire with wire clamp.
IMPORTANT !
Wrong!
0.78"
(20mm)
On widest one flat plane (only)
Do not bend sideways.
Flexible on one axis
maximum band radius 4”
Tape light strip does not light
Ÿ
Make sure your power supply is turned on and has the correct voltage.
Ÿ
Confirm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.
Ÿ
This is the result of voltage drop. Decrease the length of the 24V power feed or use thicker power feed wires between the 24V power supply
and the lighting strips.
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 24V power.
LEDs farthest from the power supply are noticeably dimmer
LED Flex Strip lights blink on, then go off
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
IMPORTANT INSTRUCTIONS
MD-024-096VTDHV2
MD-024-060VTDHV2
13.3 Feet (Continuous 48 Watts)
MD-024-192VTHD52JV2
2 X 21.3 Feet (Continuous 77 Watts
each channel)
1-800-387-4081
ledworldlighting.com ledworld.ca
|
No Spot COB Lighting LED Flex Strip
Model
: HH-SCOBX-528-24 (X = COLOR WW: Warm White / NW: Neutral White )
MD-024-288VTHD52JV2
3 X 21.3 Feet (Continuous 77 Watts
each channel)
Copyright © 2022 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.3 08/22/22
