4/4
MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY LED WORLD’s CLASS 2 POWER SUPPLY
Apply 1 ½” long electrical heat shrink over all connection points. Secure connection wire with wire clamp.
IMPORTANT !
Wrong!
4"
(100mm)
On widest one flat plane (only)
Do not bend sideways.
Flexible on one axis
maximum band radius 4”
TROUBLESHOOTING
Tape light strip does not light
Ÿ
Make sure your power supply is turned on and has the correct voltage.
Ÿ
Confirm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 24V power.
LED Flex Strip lights blink on, then go off
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
Ÿ
This is the result of voltage drop. Decrease the length of the 24V power feed or use thicker power feed wires between the 24V power supply
and the lighting strips.
LEDs farthest from the power supply are noticeably dimmer
LED FLEX STRIP - Constant Current IC
Model
: HH-S2835X-120-24V-C (X = COLOR W:Pure White / WW:Warm White / NW:Nuetral White)
1-800-387-4081
ledworldlighting.com ledworld.ca
|
Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.2 - 10/15/21
Power Supply
Max Feet of LED Flexstrips
Power Supply
Max Feet of LED Flexstrips
14 Feet (Continuous 77 Watts)
MD-024-096VTDHV2
MD-024-060VTDHV2
8.72 Feet (Continuous 48 Watts)
MD-024-192VTHD52JV2
2 X 14 Feet (Continuous 77 Watts
each channel)
MD-024-288VTHD52JV2
3 X 14 Feet (Continuous 77 Watts
each channel)
