LED World HH-S2835 120-24V-C Series, Quick Start Manual

Page: 3 / 4

3/4
LED STRIP CUTTING
Our strips comes with cut mark sign. Strips are be cuttable at each 6 LEDs. Cut
marks lying between set of soldering points.
-
-
- -
LAYOUT OPTIONS
Note: Always check the Wattage of your LED Strip or Fixture.
Power Supply Wattage x 0.8 = Available Wattage
CONNECT WITH QUICK CONNECTORS/SOLDERING
-
Soldered Contacts
Class 2 Power Supply
Layout 2
40W 18W
Available 80W
18W
Class 2 Power Supply
Layout 3
40W 18W
Available 80W
18W
24VDC (100W)
24VDC (100W)
Class 2 Power Supply
24VDC (100W)
Class 2 Power Supply
Layout 1
38W 38W
50W 50W
Available 80W Available 80W
24VDC (100W)
Layout with Overload !
Do Not Use
Securely mount wires
using wire clamps
Note: Peel 3M tape before using with Quick Connectors
INPUT
120V AC 60Hz
Regulated Class 2 Power Supply
24VDC LED Flexstrip
+
-
Figure shows LED Flexstrip
connected to a Regulated Class 2
Power Supply
POWERING OPTION
LED FLEX STRIP - Constant Current IC
Model : HH-S2835X-120-24V-C (X = COLOR W:Pure White / WW:Warm White / NW:Nuetral White)
1-800-387-4081
ledworldlighting.com ledworld.ca |
Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.2 - 10/15/21
Connect LED light strips with our optional strip connectors. Please refer to our quick
connector instruction sheet included with the connector bag.
However, it is
strongly recommended to solder the connection.