background image

4/4

Wrong!

4"

(100mm)

On widest one flat plane (only)

Do not bend sideways. 

Flexible on one axis

maximum band radius 4”

MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY LED WORLD’s CLASS 2 POWER SUPPLY

IMPORTANT !

 

1

2

3

Apply heat with heat gun to seal connection. 
Wire jacket must be covered by Heat shrink 
(1/4"") and PVC cover must be 1/2". RTV 
Electronics grade silicone glue to seal.

0.50"

1 ½”long, 3/8” Wide electrical heat 
shrink. RTV Electronics grade silicone 
glue over connections to seal.

Solder wires and place end cap over 
wire as in Fig.2. End cap must also be 
sealed with heat shrink.

The following task requires personnel experienced with soldering and low voltage DC wiring techniques.

Note : End cap is included in each light kit along with mounting clips. If product is cut, it is no longer water resistant (IP-22)

TROUBLESHOOTING 

Ÿ

Consider testing with a multimeter to ensure light strip is receiving 24V power. 

Ÿ

This is the result of voltage drop. Decrease the length of the 24V power feed or use thicker power feed wires between the 24V power 
supply and the lighting strips.

LED Flex Strip lights blink on, then go off

Ÿ

The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.

LEDs farthest from the power supply are noticeably dimmer

Tape light strip does not light

Ÿ

Make sure your power supply is turned on and has the correct voltage.

Ÿ

Confirm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.

Ÿ

Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.

IMPORTANT INSTRUCTIONS

LED FLEX STRIP - Bright Plus

  

Model

: FC60M28-10M-24V-X (X = COLOR    W:Neutral White / WW:Warm White)

 

1-800-387-4081

 

ledworldlighting.com ledworld.ca

 | 

 

Power Supply

Max Feet of LED Flexstrips

Power Supply

Max Feet of LED Flexstrips

35 Feet (Continuous 77 Watts)

MD-024-096VTDHV2

MD-024-060VTDHV2

21.81 Feet (Continuous 48 Watts)

MD-024-192VTHD52JV2

2 X 35 Feet (Continuous 77 Watts
each channel)

MD-024-288VTHD52JV2

3 X 35 Feet (Continuous 77 Watts
each channel)

Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.2 - 10/15/21

Reviews: