LED World FA30M50-5M-12V-RGB, Important Instructions

Page: 2 / 4

2/4
FLEX STRIP CONNECTION
Wire connection using WAGO block
connectors
RGB LED Controller
AC120V
LED Flex Strip
WAGO
Cut instructions
G
Solder Connection Points
100mm (3.93”)
Solder connection points are at marked intervals.
Cut points are at every 3 LEDs (12VDC)
Note Polarity Marks
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
Class 2 Power
Source
Polarity marks must match
otherwise strip will not work
Ÿ
Back Lighting
Ÿ
Cove Lighting
Ÿ
Task Lighting
APPLICATIONS
Ÿ
Display Lighting
Ÿ
Lighting Store
Ÿ
Under Cabinet Lighting
Ÿ
Accent Lighting
Ÿ
Sign Lighting
IMPORTANT INSTRUCTIONS
WIRING FOR VOLTAGE DROP
Voltage drop is normal loss of voltage that occurs as power ows along a wire connection in a low voltage systems, and increases as the length of a
wire connection is increased. Wire length and thickness as well as total light wattage inuence the amount of voltage drop.
Recommended maximum wire lengths - 12VDC
Wire Guage (AWG)
20 AWG
18 AWG
16 AWG
20W 30W 50W 60W 90W 100W
13 FEET
21 FEET
34 FEET 22 FEET
14 FEET
9 FEET 5 FEET 4 FEET 3 FEET 3 FEET
4 FEET 5 FEET 7 FEET 8 FEET
13 FEET 11 FEET 7 FEET 7 FEET
INSTALLATION PLANNING
LED Flexstrip is a versatile lighting product that can provide a superior lighting solution in a variety of
applications.
Recommend design steps before starting the installation process:
General questions based on lighting requirements:
Ÿ
Where will your power supply be located
Ÿ
How will you switch your LED lighting ON and OFF?
Ÿ
What is the best layout conguration for your installation with wiring consideration?
Ÿ
How will you run your wiring to your LED strip lighting?
WATTAGE CALCULATION
The LED Flex Strips have a label on each roll that indicates the voltage and wattage. You must have the correct Class 2 Power Supply (Transformer) for
LED Strip model. To calculate the wattage, measure the total length of LED Strip in your run multiplied by the wattage of the LED Strip. Remember that
a power source should only operate at a maximum 80% of it rated capacity.
For example : 10 feet of FA30M50-5M-12V-RGB x 2.2W = 22 Watts
Never Extend the Length of rolls. Rolls are sold in there max length.
IMPORTANT NOTE
Mount Strips on Clean (No Wax/Oil), dry,
smooth, burrows free surface. Adhesion
can be made once and LED Strip must
fully adhere to surface.
Download Magnitude app for voltage drop calculations:
Android App
IOS App
RGB LED FLEX STRIP
Model : FA30M50-5M-12V-RGB (RGB: Red, Green, Blue)
1-800-387-4081
ledworldlighting.com ledworld.ca |
Copyright © 2019 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.0 - 09/18/19