30
Main Settings
Contains basic settings of the LEC3 device.
Main settings display basic settings of the device
Name of the device. You can change this in the settings.
MAC address of the device.
Shows the current DIP switch state.
Shows whether SD card is inserted into the device (Yes/No).
Current maximal brightness of the SPI outputs.
Shows current firmware version. You can update firmware
version to obtain latest features and improvements.
Shows current control mode. See the LEC3 control modes
for details.
Displays current IP address of the device. This can be changed
using DIP switch or in the configuration.
Displays current IP address mask.
This can be changed in the configuration.
Displays default IP address of the device. Default IP address is
used in case the DIP switch is set to 0.
Device name
MAC address
DIP switch state
SD-Card inserted
Max brightness
Firmware version
Control mode
Current IP
Current mask
Default IP
Summary of Contents for LEC3
Page 14: ...14 LEC 3 Dimensions Side View Back View Front View Bottom View...
Page 41: ...41 Notes...
Page 42: ...42 Notes...
Page 43: ...43...
