The STAGE PRO SPOT 650/1000/1200 PC is already equipped with the Colour Frame (fig. 1 and 5).
To insert the filter in the Colour Frame, follow these instructions:
1) Unhook the clamping lever on the left side of the unit (fig. 1 and 4);
2) Take off the Colour Frame and insert the filter;
3) Take off the spring clip, insert the filter and put back the spring clip;
4) Put back the Colour Frame in its room making it sliding on its track.
To fix the 4-Leaf Barndoors (on request - fig. 3) follow these instructions:
1) Unhook the clamping lever on the left side of the unit (fig. 1 and 4);
2) Insert the 4-Leaf Barndoors in its room making it sliding on its track.
fig. 4
COLLEGAMENT
COLLEGAMENT
COLLEGAMENT
COLLEGAMENT
COLLEGAMENTO FONTE DI ALIMENT
O FONTE DI ALIMENT
O FONTE DI ALIMENT
O FONTE DI ALIMENT
O FONTE DI ALIMENTAZIONE
AZIONE
AZIONE
AZIONE
AZIONE
2
fig. 3
CODE 040102
STAGE PRO SPOT
650/1000/1200 PC
CODE 991187
POWER SUPPLY INPUT
The unit must be connected to the earth. The inobservance of
these instructions automatically makes the guarantee expiring.
!
Before installing the STAGE PRO SPOT 650/1000/1200 PC, make sure that the carrying structure is safe and able to
support the weight of the unit.
The STAGE PRO SPOT 650/1000/1200 PC is equipped with a bracket with a hole in the middle (diam. 10 mm.) to fix
clamps and/or screw bolts (fig. 1 and 4).
To orientate the unit follow these instructions:
1) Unscrew the Manual Orientation Knob on the side of the unit (fig. 1);
2) Orientate the unit using the apposite handle at the back (fig. 4);
3) Screw the Manual Orientation Knob.
• It is possible to turn the bracket up or down.
!
At the end of the assembling operations make sure that the unit has been correctly and safely fixed.
ASSEMBLING
ASSEMBLING
ASSEMBLING
ASSEMBLING
ASSEMBLING
Before connecting the unit to the mains, make sure that the working voltage and frequency correspond to the values
indicated on the label (fig. 4).
The STAGE PRO SPOT 650/1000/1200 PC is made to work at a working voltage of 230V 50Hz; 2.8/4.3/5.2 A (depending
from the Lamp).
The unit mains connections are described in fig. 4/a.
FIXING THE COL
FIXING THE COL
FIXING THE COL
FIXING THE COL
FIXING THE COLOUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORS
OUR FRAME AND THE 4-LEAF BARNDOORS
LIGHT BEAM MANUAL
ORIENTATION KNOB
HANDLE
SAFETY CHAIN FIXING EYE
COVER
BRACKET
CLAMPING LEVER TO INSERT
THE COLOUR FRAME AND
THE 4-LEAF BARNDOORS
CONNECTION T
CONNECTION T
CONNECTION T
CONNECTION T
CONNECTION TO THE POWER SUPPL
O THE POWER SUPPL
O THE POWER SUPPL
O THE POWER SUPPL
O THE POWER SUPPLY
Y
Y
Y
Y
IMPORTANT
!
It is recommended to use only filters with an high temperature resistance.
fig. 4/a
L = PHASE (Brown)
N = NEUTRAL (Blue)
= EARTH (Green - Yellow)
THREE POLES FEMALE CONNECTOR
FOR THE CONNECTION TO THE MAINS
L
N
