www.globallightllc.com
Fax: +971 4 341 10 90
Tel: +971 4 340 44 58
1. Turn on button and red indicator will turn on. Please make sure the remote indicator light is on while
operating the remote.
2. If 2 or more zones are programmed, each zone can be controlled separately by pressing
corresponding zone number first.
3. To set each zone to an individual color, red, green, or blue, press the zone number and then
corresponding letter on the remote.
4. There are 10 preset color schemes built into the remote and you may press button to run or
pause a preset color scheme. To change from one color scheme to another, you must pause the
existing preset by pressing button and press button again for next preset color scheme.
5. You may use the touch button to set to a desired color simply by dragging over touch ..
If you are in preset color scheme mode, you must press the button before dragging
on touch .
6. Once the desired color scheme is set, you may increase the speed of color changing by pressing
or button. The button will increase and will reduce the speed of color changing.
7. Once the desired color scheme is set, you may increase the intensity or brightness
of LED’s by pressing
or button. The button will increase and will reduce the brightness or intensity of L
ED’s.
How to operate the remote control
Please kindly read the instructions carefully before
installation, and keep it well for your future reference.
All installation and maintenance must be carried out by qualified Technicians and Engineers
#NOTE :
When all zones programming is done, Press button to turn all zones off and then turn on again,
this will save all programs.