18
UCR301
Professional Audio Products Since 1971
SERVICE AND REPAIR
If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment
needs repair. Make sure you have followed the setup procedure and operating instructions. Check out the
interconnecting cords and then go through the TROUBLESHOOTING section in the manual
We strongly recommend that you
do not
try to repair the equipment yourself and
do not
have the local repair shop
attempt anything other than the simplest repair. If the repair is more complicated than a broken wire or loose
connection, send the unit to the factory for repair and service. Don’t attempt to adjust any controls inside the units.
Once set at the factory, the various controls and trimmers do not drift with age or vibration and never require
readjustment.
There are no adjustments inside that will make a malfunctioning unit start working
.
