DM Series Installation Guide
Rio Rancho, NM
5
Introduction
The purpose of this guide is to assist in the setup and
operation of a typical DM system. This guide assumes
familiarity with the DM Series Digital Audio Processors,
its components and software menus and setup screens.
To get the most out of the DM system, it is suggested
to review the information presented in the DM Series
Reference Manual.
A detailed online Help is also available to assist in
the setup and operation of a DM system using the
USB interface and a Windows
®
2000 or Windows
®
XP
computer system. In addition to assistance setting
up and operating the DM system, the Help includes a
complete listing of the DM General Commands. These
commands can be used to setup and operate the DM
system via external devices using either the USB or
RS232 serial port.
Unpacking the Unit
Compare the packing list enclosed with the unit with
the original order. Inspect all items for damage. Im-
mediately call 1-800-821-1121 to report any items that
are missing or damaged. The sooner we get notified,
the sooner we can get any needed replacement items
shipped to your location.
Items Included in the Box:
Reference Manual
Power cable
5-pin de-pluggable connectors:
20 each for the DM1624
14 each for the DM1612
10 each for the DM812
CAT-5e cables (2 each) 12” with shielded RJ45 con-
nectors
Lectrosonics screwdriver
DB9 to TRS (Stereo mini) cable – BLACK - for
laptop setup
DB9 to TRS (Stereo mini) cable – RED - for touch
panel control systems
USB cable
CD-ROM with LecNet2 software and documenta-
tion in Acrobat PDF files
Again, if there are any problems or items missing, im-
mediately call 1-800-821-1121 and ask for anyone in
sales or service.