manualshive.com logo in svg

Lectronics DM Series, Hardware And Software Installation Manual, Page: 13 / 16

Share
Download
Lectronics DM Series Hardware And Software Installation Manual Download Page 13

DM Series Installation Guide

Rio Rancho, NM

13

USB Driver Installation (Windows 2000)

First Time Installation

When a LecNet2™ device is connected to a comptuer 

system running the Windows

®

 2000 operating system 

for the very first time, the Windows 

Found New Hard-

ware Wizard

 automatically opens.

Use the following procedure to install the LecNet2™ 

USB driver using the Wizard.

1. 

Connect a cable between the DM processor USB 

port and the computer system.  Place the Lec-

Net2™ Installation Disk in the computer system’s 

CD-ROM drive and click 

Next>

 to continue.

2. 

Select 

“Search for a suitable driver for my de-

vice (recommended)” 

and click 

Next>

 to continue.

3. 

Check “CD-ROM drives” then click 

Next>

 to search 

the LecNet2™ CD for the USB driver.

4.

  When it is found, the LecNet2™ device name will 

be displayed. Click 

Next>

 to install the driver.

5.

  When the driver installation is complete, the final 

page of the Wizard appears.  Click 

Finish

. It is now 

possible to connect to the LecNet2™ device.

Summary of Contents for DM Series

















Reviews:

No comments