WaveSurfer Accessory
Indicators
The following describes the status indicators of the printer.
Normally, the POWER lamp is lit and the printer is ready for
printing.
If an error occurs, the contents of this error are shown by the states
(lighting or flashing) of the POWER and ERROR lamps.
Table 1 Printer Status Indications
POWER switch
Status
Lamp indication
POWER lamp
Lit
Normal status
(Ready for printing)
ERROR lamp
Off
POWER lamp
Flashing
Abnormal voltage
ERROR lamp Lit or Off
POWER lamp
Lit
Temperature error
(See NOTE below)
ERROR lamp
Flashing
POWER lamp
Lit
ON
Thermal paper run-out
ERROR lamp
Lit
POWER lamp
Off
OFF
Power OFF
ERROR lamp
Off
NOTE
This error is indicated when the temperature of the printer
has risen and exceeded the limit after the printer was used
for a long time. If this occurred, printing stops until the
head cools off. After it has cooled, printing will restart.
21
