Leckey Comfee Seat, User Instructions

Page: 16 / 25

You have a choice of 3 armrest height
positions. To adjust armrest height, pull the
lever at the front below the gable (a). While
pulling the lever, lift the gable / armrest
assembly up to the required position.
Release the lever and the armrest will lock
into the closest pre-set height position. You have a choice of 5 angle adjustments
for the size 2 and 3 and a choice of 4 angle
adjustments for the size 1. To adjust the
armrest angle, push down on the lever at
the rear below the gable (b). While pushing
the lever, hold the armrest at the rear (c) and
push the armrest into the required position.
Release the lever and the armrest will lock
into the closest pre-set angle position.
10.5 Armrests
C
A
B
Locate the lever at the left hand side of the
calf support (a). Pull the lever while adjusting
the calf support to the required angle.
Release the lever to lock. To adjust the height of the footplate, for size
1 and 2, slide the centre footplate bar into
footplate receiver behind the calf support to
the required height. Tighten the soft touch
knob on the footplate receiver to secure (a).
For size 3, slide the 2 footplate bars into the
2 footplate receivers behind the calf support
to the required height. Tighten the soft touch
knob on each footplate receiver to secure.
To angle adjust the padded footplate, use
your Leckey Tool. Locate the bolt underneath
the padded footplate inside the slot in the
material (b). Adjust the angle by turning the
bolt clockwise or anti-clockwise depending
on angle required.
10.6 Calf Support 10.7 Padded Footplate
A
A
B