Leckey Comfee Seat, User Instructions

Page: 11 / 25

To height adjust the headrest, loosen the soft
touch knob at top rear of seat (a) and adjust
to height required, tighten knob to secure.
For depth adjustment, remove the headrest
cover by pulling the two tabs off the poppers
(b). Unscrew the 2 bolts on top of the
headrest (c) and slide to required position.
Tighten bolts to secure and re-attach
headrest cover.
9.1 Headrest With or
Without Speakers
A
B
C
Remove seatbase cushion by pulling tabs
away from poppers underneath the rear
of the seat and lifting cushion off Velcro
strips. Feed the 4 pelvic belt straps through
camlock fittings (a). Pull the straps to the
required position and clamp to secure. Using
the 2 adjustment straps at the centre buckle
(b), pull to required position for final fitting. You have a choice of 3 armrest height
positions. To adjust armrest height, pull the
lever at the front below the gable (a). While
pulling the lever, lift the gable / armrest
assembly up to the required position.
Release the lever and the armrest will lock
into the closest pre-set height positions.
You have a choice of 4 angle adjustment
positions for size 1 and a choice of 5 angle
adjustment positions for size 2 and 3. To
adjust the armrest angle, push down on the
lever at the rear below the gable (b). While
pushing the lever, hold the armrest at the rear
(c) and push the armrest into the required
position. Release the lever and the armrest
will lock into the closest pre-set angle
position.
9.2 Four Point Pelvic Belt 9.3 Armrests
A
A
B
B