Advance Bath Chair User Manual
p13
10.4 CALF SUPPORT
ADJUSTMENT
The calf support can be adjusted
into four positions by pulling down
on the levers, moving to the required
position and then releasing the lever
into position.
10.5 CHEST BELT
ADJUSTMENT
To position the foam pads under the
user’s armpit, while looping the strap
around the back of the frame and
secure with Velcro at the front as
shown. The lateral supports can also
be positioned out of the way at the
back of the seat if the user does not
require this level of support.
10.6 ABDUCTION
STRAP ADJUSTMENT
Once the abduction strap has
been attached the legs are then
positioned and secured by the
smaller Velcro straps.
When adjusting the
Advance Bath Chair
into any position ensure
the locking pin is fully
engaged.