15
Screw the bearing unit into the housing
by hand until a slight resistance is felt. Do
not use excessive force to tighten, the
pin may not be fully inserted into the two
grooves.
Rotate the spray head by hand while blocking the turbine shaft with one finger until the pin
is inserted into the grooves. A „clicking“ sound will be made. The preload of the bearing
unit against the housing must be adjusted by first unscrewing and then screwing it in.
If the pin is locked into the grooves,
screw the bearing unit onto the housing
by hand.
Continue with step 35 on page 16
34a
34b
34c
Method B
