Tip
12
Insert new O-ring into the O-ring groove
of the housing part.
Insert a new O-ring into the O-ring groove
of the fitting and ensure that the O-ring
on the thread is not damaged.
The connection piece is now screwed
by hand onto the turbine side of the
housing.
REASSEMBLY
The position of the three gear box pins in
the certain grooves must be shown.
It is necessary to turn the output shaft of
the gearbox in order to insert the turbine
gear into the gearbox.
A suitable grease for EPDM can be
used for mounting the O-rings.
25
26
27
28
