4
Installing Your Appliance
Before you start
This appliance must stand vertically on a flat, even surface, to level the appliance use
the leveling feet by turning them until the appliance is as level as possible. Do not
install onto carpeted surfaces as this prevent adequate ventilation.
Install the appliance in a well ventilated room. The appliance should not be placed
near to any heat heat sources (cookers, heaters etc.) or in any unheated rooms
(garages, outhouses etc.) as the ambient temperature affects the performance of the
appliance.
Do not expose the appliance to damp conditions, open air or rain.
Do not lift the appliance by the pipes or the door when moving.
Should the appliance become damaged, contact Lec Customer Care and do not use the
appliance until you are instructed to do so by a service engineer.
Installation clearances
Allow 100mm clearance at the rear of the appliance and adequate clearance on
each side and over the top to ensure proper ventilation (see figures). Use
whichever dimensions suit your installation requirements best.
This appliance is intended to be used in households but is not intended to
beused in applications such as;
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses and by clients in hotels, motels and other residential type
environments;
– Bed and breakfast type environments;
– Catering and similar non-retail application