13
Changing the light bulb
Note.
Light bulbs are not covered by the warranty.
Disconnect the appliance from the mains supply.
Remove the light bulb cover.
Unscrew the bulb.
Replace with a E14 screw-cap type 15 Watt (Max) bulb that is the same shape and
size.
Replace the light bulb cover.
Changing the Plug
Any electrical work required to install this appliance should be carried out by a qualified
electrician or competent person. This appliance must be earthed. The manufacturer
declines any liability should these safety measures not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply voltage is the same as that indicated
on the appliance rating plate. The appliance is supplied with a 13 amp plug fitted. In the
event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS
1362) fuse must be used. Should the plug need to be replaced for any reason. The wires in
the mains lead are coloured in accordance with the following code:
Green and Yellow: Earth Blue: Neutral Brown: Live
The wire coloured green and yellow must be connected to the terminal marked with the
letter “E“ or by the earth symbol or coloured green and yellow. The wire coloured blue
must be connected to the terminal “N“. The wire coloured brown must be connected to
the terminal marked “L“.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp
must be secure over the outer sheath.