Lec CU 157, Operating Instructions Manual

Page: 6 / 16

6
Before You Start
● CU 157, CU 157 S freezers are equipped with a top cover and are designed to fit
under 865 mm high standard work tops and benches.
● For easy opening of the refrigerator door the distance between the side (the hinges
side) and the room wall (or similar) should be at least 5 cm.
● Any modification of the refrigerating system is prohibited. Be especially careful not
to do any damage to the capillary tube (Photo 2 (1)) located in the recess next to the
compressors. The tube cannot be bent, straightened or coiled. Damage of the capillary
tube by the user waives the guarantee of the freezer.
Placement of the product
● Unpack the product; remove the tape securing the door and the accessories. Remove
the remains of the glue, if any, with delicate cleaning detergent.
● Do not throw the Styrofoam element of the packaging away. Should you have to
transport the product again, secure the freezer with the Styrofoam elements, the plastic
foil, and Scotch tape.
● Wash the inside of the freezer chamber and the accessories with lukewarm water
with some dishwasher liquid and then wipe it and dry.
● Place the freezer in a dry, ventilated place, out of sun, far from heat sources such
as central heating radiators, etc.
● If you place the freezer next to another refrigerating or freezing unit, the lateral
distance between the appliances should be at least 2 cm.
● Make sure the product is placed level adjusting two turn-in front feet of the freezer.
● Once placed, make sure the freezer is not standing on the power supply cord.
GB/IE
2
1
▼
▐