8
Viewing freezer temperature
(applies to LSC263 & LSC324 only)
Changing the factory set point
(the set point is the point at which the fridge-freezer normally holds the temperature at; in some
circumstances such as high/low room temperatures it may be necessary to adjust this slightly)
Function
Press
Hold button(s)
down for
Example screen
To change the set point
3 seconds
followed by
Once
followed by
1 second
(current set point)
followed by
/
(Increase / Decrease)
up to 10 times
followed by
1 second
Note: set point can be increased or decreased in +/- 0.1° increments by a MAXIMUM of 1°C
