4
Unlock the Packaging Locks
Getting Started
Battery Removal and Installation
1. Make sure the unit is turned
Off
.
2. Find the battery cover located on the back of the unit, use
screwdriver or coin to loosen the screw and then open the
battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AA (AM-3/LR6)
batteries following the diagram
inside the battery box. (For
best performance, alkaline
batteries or fully charged Ni-MH
rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
