4
Battery Removal and Installation
1. Make sure the unit is turned
Off.
2. Find the battery cover located on the back of the unit, use
a screwdriver or a coin to loosen the screw and then open
the battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new ‘AA’ (AM-3/LR6) batteries following the diagram
inside the battery box.(For best performance,alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING / ATTENTION :
Adult assembly required for battery installation.
Keep batteries out of reach of children.
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
91-003937-003-000.indd 4
91-003937-003-000.indd 4
10/28/2020 08:45:38
10/28/2020 08:45:38
