Important Information and Introduction for the LT1000™ Noise
Reducing Metered Amp (Requires 2 AA batteries)
Thank you for purchasing your new LT1000. The only state of the art amp made
specifically for the leak detection industry. The LT1000 can be used in conjunction with
the
SLIDE MIC™, POOL SCOPE™, DECKPLATE™, PIPE MIC™,
LISTENING DISC™ AND SOIL PROBE™.
Specifications:
Input
•
Connector:
XLR Female Unbalanced
•
Noise:
EIN better than -107 dBV.
•
Input Impedance:
3.3kΩ nom.
•
Plug-In-Power:
12V maximum via 4.7kΩ resistor.
•
Filter Switch:
Filterg capabilities below 700Hz.
•
Compatible Accessories:
LeakTronics –
PipeMic
,
SlideMic
,
Soil Probe
, Listening Disc,
Flash
,
Pool Scope
,
DeckPlate
Headphone Output
•
Connector:
3.5mm
•
Gain:
-inf to 66dBV nom.
•
Output impedance:
41.7Ω.
•
Distortion:
0.1% no load, 2% at full load.
•
Mute Switch:
Attenuation better than 60 dB when switch is ON.
Auxiliary Output
•
Connector:
2.5mm
•
Gain:
30 dBV constant.
Meter
•
Sense Switch:
Select high sensitivity (10:1 power ratio) or low sensitivity (1000:1 power ratio).
•
Meter Null:
Set needle to center of meter to gauge baseline noise.
•
Sensitivity:
-80 dBV.
LeakTronics LT1000 Manual
Page #3
