background image

.Troubleshooting 

1. If the device couldn’t be on line in the tracking platform after you keep the power on, please check the 

problems as below:     

1) Please according to the specification to check whether the SIM card is installed correctly.

  

2) Please make sure the LED indicator light condition is right. When it is functioning normally, the GSM 

indicator lighting-on time is 0.1S, and on GPS indicator lighting-off time is 2S. 

3) Please check whether the GPS has been located in the platform. If not, please put the device in outside 

with good signal reception.   

 

2. If the device is showing off line on the platform, please check the problems as below:     

1) Check LED indicator light condition is right. 

2) Whether the charge of SIM card is overdue. 

3) Whether SIM card open GPRS function. 

4)  Query  the parameter  Setting.  Check serial number  of the  equipment,  and the  interval  of  GPRS upload 

time is correct. 

Comparision List of GPS Watch Tracker commands (Model: LDW-TKW19G/19M) 

Note:

   

1, All commands as below are by SMS. (default device password: 123456) 

2, All the commands letter in lower case format. 

3, All the setting or checking commands will be replied with related content by SMS. 

4, If successful, it will reply: Set successfully! If not you need to re-set it. 

Settings as below:

   

 

 

 

 

Commands 

Example 

Service 

Center Number 

pw,device 

password,center,number# 

pw,123456,center, 18688751382# 

 

Slave       

Center Number 

pw,device 

password,slave,numbers# 

pw,123456,slave, 18688751392#

 

Delete 

Center Number 

1.pw,device password,center,d# 

2.pw,device password,slave,d# 

pw,123456,center, d# 

SOS Number 

Setting 

1.sos1,numbers# 

2.sos2,numbers# 

3.sos3,numbers# 

1.sos1, 18688751382# 

2.sos2, 18688751392# 

3.sos3,13800138000# 

Delete SOS 

Number 

1.sos1# 

2.sos2# 

3.sos3# 

1.sos1# 

2.sos2# 

3.sos3# 

APN Setting 

apn

,apn name,,,# 

1.apn,

cmnet

,,,

apn,

cmnet 

Server Setting 

ip,IP Adress,port,Port Number# 

ip,124.232.150.158,port,9500#

 

Work Mode 

Setting 

1: m1,t#    (GPS has been working) 

2: m2,t#    (Power Saving Mode) 

1. m1,20# 

2. m2,600# 

Summary of Contents for TKW19M













Reviews: