ENGLISH
Vertical narrow jet for
horizontal coating
direction
Horizontal narrow jet
for vertical coatiang
direction
Vertical wide jet for
horizontal coating
direction
Horizontal wide jet
for vertical coating
direction
Small-medium
size surface
Large size
surface top
coating
Initial coatings,
corners, edges,
and hard to reach
locations
Small circular jet
Application
Spray Width Lever #8 Air Cap #5
Spray Jet Pattern
There are three spray patterns to choose from:
- Vertical Flat Jet
- Horizontal Flat Jet
- Circular Jet
Turning the smart
nozzle selector
(#3) clockwise
until stop.
Turning the smart
nozzle selector
(#3) clockwise
until stop.
Turn the Spray
Width Lever (#8)
Minimum.
to the icon of
Application
Air cap (#4)
Spray Jet pattern
Spray with (#7) lever
Initial coatings,
corners, edges,
and hard to reach
locations
Small circular jet
Vertical narrow jet for
horizontal coating
direction
Vertical wide jet for
horizontal coating
direction
Horizontal narrow jet
for vertical coatiang
direction
Horizontal wide jet
for vertical coating
direction
Small-medium
size surface
Large size
surface top
coating
Note: Spray nozzle can only be assembled in one
direction that the notch of the nozzle (#5) must
align with the skirt on spray unit the housing (#9).
Refer to FIG. S1 for proper assembly.
WARNING! RISK OF INJURY. Never point
the Spray sprayer at any part of the body. Never pull
trigger while adjusting the spray setting.
ADJUSTING WIDTH OF SPRAY PATTERN
By turning the Spray Width Lever (#7) between
the Minimum marking and Maximum marking
the width of the spray patterns can be adjusted
accordingly.