32
System Memory Vmem [Default]
The options are:
+0.1V
,
+0.2V
,
+0.3V
, and
Default
.
AGP Skew Adjust [Default]
The options are:
Default
,
+250PS
,
+500PS
, and
+750PS
.
PCI Skew Adjust [Default]
The options are:
Default
, and from
–400PS
to
+1100PS
at 100PS increments.
ICH Skew Adjust [Default]
The options are:
Default
, and from
–400PS
to
+1100PS
at 100PS increments.
4.10 Load Basic Defaults
The BASIC Defaults have been set to provide the minimum requirements for your
system to operate. Its performance is lower than the “Load Best Defaults”. We
suggest you use “Load Best Default”. If your system card has compatibility
issues, use the “Load Basic Defaults”.
4.11 Load Best Defaults
The “Load Best Defaults” function loads the system manufacture default data.
This is the default setting from Leadtek. This function will be necessary when the
system CMOS data is corrupted or you forget your settings.
4.12 Set Supervisor/User Password
Passwords can be set to provide protection for the BIOS configuration options, or
to restrict access to the computer itself.
When enabled, User Password will require all users to enter a password in order
to use the system, and/or enter the BIOS setup (but can’t change its contents). A
Supervisor Password is used to protect the stored CMOS options from being
changed by unauthorized users.
Keep in mind that when set, a password is required only when booting the
system. It will not provide protection to a system that is already booted.
The password check option is set in BIOS FEATURES SETUP by choosing either
System (the password prompt appears every time the system is powered on) or
Setup (the password prompt appears only when the user enters the BIOS Setup).
The password is stored in CMOS RAM, and can be cleared by removing the
battery for a while and then re-installing it back.
