Leadtek WinFast 3D S320, User Manual

Page: 25 / 35

WinFast 3D S320 II User’s Manual
21
Step 7
Select the “ Change ” button in the “ Adapter Type ” section; a window with a title name of
“ Change Display ” will appear on your screen.
Step 8
Select the “ Have Disk ” button; a window with a title name of “ Install From Disk ” will appear
on your screen.
Step 9 Specify the path X:\S320ii S320ii S320ii S320ii\NT40 (X means CD-ROM drive letter) and select the “ OK ” button in
the “ Install From Disk ” window ;Then press “ OK ” in the “ Change Display ” window; a
window with a title name of “ Third Party Drivers ” will appear on your screen.
Step 10
Select the “ Yes ” button in the “ Third Party Drivers ” window.
Step 11 After all new drivers are installed, a message indicating the complete installation of the driver will
appear on your screen. Press “
OK ”.
Step 12 Select the “ Close ” button in the “ Display Type ” window. Select the “ Close ” button in the
“ Display Properties ” window; a window with a title name of “ System Settings Change ”
will appear on your screen.
Step 13 Remove the diskette from your floppy drive A and press the “ Yes ” button to restart
Windows NT 4.0.
Step 14
When the system is rebooted, enter “ Windows NT 4.0 ” from the Boot Menu List.
After logon of Windows NT, the “
Invalid Display Setting ” applet will appear on your screen
NOTE: This window will only appear when you use new display drivers for the first time.