More Security, More Convenience
5
LAN:
RJ-45/10-100 base T
Power:
DC 5V/2A power supply
Network Light:
The green LED will on when connect to the network, the yellow LED will blink when data
transferred
Audio Output:
The jack is used to plug external speaker
I/O PINS:
1 Output A 2 Output B 3 Alarm input 4 Input (GND)
RESET BUTTON:
Press and hold the RESET BUTTON for 15 Seconds, then the IPCAM will be reset back to
the factory default Parameter. (Please keep the power on when do RESET)
1.3.3 Back View
Figure 1.3
There are some stickers at the bottom, such as MAC address sticker, QC sticker etc.
If your camera does not have these stickers, it may be a clone one, clone IPCAM could not use the original
firmware and obtain our good after sale service.
1.4 PC System Requirements
System configuration requirements :
( Example for viewing four IPCAM)
CPU:
2.06GHZ or above
Memory
: 256M or above
Network Card:
10M or above
Display Card
: 64M or above memory
Recommendable Operating system:
Windows 2000/ XP/ Vista/ 7/8/8.1
1.5 Hardware Instruction
