Check if all the components are complete before installation, the components and quantity of
each set as follows:
Solar Panel Components:
Lighting:
LED street light
Bracket
hasp 4pcs
M8*16
screw 6pcs
M6 cap
nut 8pcs
M6 spring
washer 8pcs
X bracket
1pc
Bird spike 2pcs
Self-tapping
screw 6pcs
M8*16 Screw 6pcs
2M DC
extended cable
2pcs
M8*25
screw 2pcs
Part List
Off-grid solar power supply system (Take gateway for example)
4G NODE Antenna
1pc each (Gateway type standard)
*For EDGE
NODE Antenna
1pc (NODE terminal standard)
*For EDGE
AE6 series is the latest double-sided photovoltaic module high power solar street light released by
LEADSUN, it adopts higher conversion efficiency mono-crystalline silicon double-sided solar panel,
high luminous efficiency LED, long lifespan lithium battery, infrared motion detection and self-developed
efficient controller, which is the most reliable powerful performance solar lighting solution and a future
design masterpiece provided by LEADSUN.
Overview
1. Definition of the native mode
OFF mode:
The system will not work, charge or
discharge.
Transport (idle) mode:
the system will power off in
an hour and goes to the OFF mode.
ON mode:
the system will work normally, charging
in the daytime and discharging at night.
*
*
*
2
.
Start up
Daytime start-up:
when the lighting condition is
sufficient
(
>30lx), the
light will illuminate for 20
Night start-up:
*
*
OFF
mode
ON
mode
Button Switch
Short press, the
light will switch
between on and off
Transport
mode
Short press, the light
will flash then off
3. Button instructions
Short press the button, if the lighting status does not change, it is in the OFF mode.
Short press the button, if the light flash and then off, it is in transport (idle) mode;
Short press the button, if the light switch between ON and OFF directly, it is in ON mode, In
this mode, it can switch the light ON by short press the button.
Short press the button (1s) to find out the current product mode:
*
*
*
Operation instruction
6
5
Long press 5 seconds
or if no operation
for more than an hour
Long press till the
light is on or lighting
condition is sufficient
in daytime.
Long press
5 seconds
second and then turn off. The light will function
as normal from that night. If there is not
sufficient lighting using the Night start-up
mode is required
hold button down for 5 seconds
After the light goes off, if it meets the normal lighting
condition the light will function as normal from that
night.
and release, the light will turn on. Pressing the
button once will turn the light off.
