www.leadingtouch.com
6
/
27
Touch Interface Connection
Note:
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and
touchmonitor are turned off.
1. Connect one end of the
power adapter
to the monitor and the other end to the connector of the
power cord.
2. Connect one end of either the
touchscreen serial (RS232) cabl
e or the touchscreen USB cable
(but not both) to the rear side of the computer and the other end to the LCD monitor. Tighten by
turning the two thumb screws clockwise to ensure proper grounding (optional module USB cable
does not have thumb screws).
3. Connect one end of the
video cable
to the rear side of computer and the other to the LCD monitor.
Tighten by turning the two thumb screws clockwise to ensure proper grounding.
4. Press the
power button
on back frame to turn the monitor power on.
