13
IMPORTANT:
Always keep your eyes on the fire tray and the people around it, when you
manoeuvre the remote control.
Always keep the remote control in hand and stay close to the control desk
ready to activate the "emergency stop button" in case of problem.
If the trainer is away from the control desk, a person must be designated to stay close
to the desk, ready to pull the "emergency stop button" in case of problem.
5.2 Use of extinguishing agents
You can work on
PYROS 3
with any extinguishing agent.
Beware of the use of foam concentrates: it traps the gas, which could ignite further
outside of the tray.
When the trainee has extinguished the fire, release the button on the remote.
When using a fire extinguisher or Co², it is possible that a trainee "blows" the flames.
Then release the button on the remote. The trainee will have the impression of having
extinguished the fire.
To avoid the risk of spread of non-ignited gas and its sudden inflammation
outside the tray, never hold down the button on the remote if no flame.
5.3 Instructions for use
Wait a few seconds before relighting the fire after an intervention so that the ignition system is
no longer saturated with gas.
Never use
PYROS 3
without water.
Think regularly to top up the level of water during training courses.
